TEREKHINA Svetlana

Production scientifique :

1. Revues et chapitres internationales avec comité de lecture

   [1] S. Terekhina and L. Hattali, Three-dimensional printing of continuous plant fiber composites, Chapter 4, Additive Manufacturing of Polymer-Based Composite Materials. © 2024 Elsevier Ltd. DOI: https://doi.org/10.1016/B978-0-443-15917-6.00004-9 

   [2] R Manaii, S Terekhina, L Chandreshah, N Shafiq, D Duriatti and L Guillaumat, Influence of fibre orientation, moisture absorption and repairing performance on the low-velocity impact response of woven flax/Elium® thermoplastic bio-composites, J of Comp Mater (2023), Vol. 0(0) 1–18. DOI: 10.1177/00219983231190694 

   [3] A. Smirnov, S. Terekhina, T.V. Tarasova, M.L. Hattali, S.N.Grigoriev, Development of low-cost Al2O3/PLA composite filament usable in open source FFF 3D printers, Int J Adv Manuf Tech (2023). https://link.springer.com/epdf/10.1007/s00170-023-11849-5

   [4] S. Terekhina, S. Egorov, T. Tarasova, I. Skornyakov, L. Guillaumat, M.L. Hattali, In-nozzle impregnation of continuous textile flax fibre/polyamide 6 composite during FFF process. Comp Part A; 153: 106725 (2022). https://doi.org/10.1016/j.compositesa.2021.106725

   [5] S. Terekhina, T. Tarasova, S. Egorov, I. Skornyakov, L. Guillaumat, L. Hattali, Flexural quasi-static and fatigue behaviours of fused filament deposited PA6 and PA12 polymer, (2021), The International Journal of Advanced Manufacturing Technology, Vol. 117, pp. 2041–2048.  https://doi.org/10.1007/s00170-021-07223-y.

   [6] S. Egorov, T.V. Tarasova, S.Terekhina, Production technology for polymeric composite materials by additive manufacturing methods, (2020), IOP Conference Series Materials Science and Engineering 971:022006, DOI: 10.1088/1757-899X/971/2/022006.

   [7] S. Terekhina, T. Tarasova, S. Egorov, L. Guillaumat, M. L. Hattali. On the difference in material structure and fatigue properties of polyamide specimens produced by fused filament fabrication and selective laser sintering, (2020), The International Journal of Advanced Manufacturing Technology, Vol. 111, pp. 93–107. https://doi.org/10.1007/s00170-020-06026-x.

   [8] S. Terekhina, T. Tarasova, S. Egorov, I. Skornyakov, L. Guillaumat, M.L. Hattali, The effect of build orientation on both flexural quasi-static and fatigue behaviours of filament deposited PA6 polymer, (2020), International Journal of Fatigue, Vol.140, 105825. https://doi.org/10.1016/j.ijfatigue.2020.105825.  

   [9] I.A. Skornyakov, T. V. Tarasova, S. M. Terekhina, Investigation of the strength characteristics of samples made of Nylon by FFF Technology, (2019), ARPN Journal of Engineering and Applied Sciences. Vol.14. №13. pp. 2427-2432. 

   [10] S.Terekhina, I. Skornyakov, T.Tarasova, S. Egorov, Effects of the Infill Density on the Mechanical Properties of Nylon Specimens Made by Filament Fused Fabrication, (2019),Technologies, 7(3), 57, https://doi.org/10.3390/technologies7030057.  

   [11] I. Derbali, S. Terekhina, L. Guillaumat, P. Ouagne, Rapid manufacturing of woven comingled flax/polypropylene composite structures, (2018), International Journal of Material Forming, Vol. 12, pp. 927–942, https://doi.org/10.1007/s12289-018-01464-1

   [12] L. Guillaumat, S.Terekhina, I.Derbali, A.Monti, A.El Mahi, Z. Jendli, Flax Fibers Reinforced Thermoplastic Resin Based Biocomposites, a Future for SustainableComposite Parts, (2018), MATEC Web of Conferences 203, 06019, https://doi.org/10.1051/matecconf/201820306019 

   [13] M. Haddad, L. Guillaumat, S. Terekhina, M. Crozatier, Analytical and numerical study based on experimental investigation of different curved sandwich composites manufactured by filament winding process, (2017), Journal of Composite Materials, 0(0) 1–27, DOI: 10.1177/0021998317714858.

   [14] J. Cinquin, X. Colin, B. Fayolle, M. Mille, S. Terekhina, M. Gigliotti, J-C. Grandidier, M.C. Lafarie-Frenot, M. Minervino, C. Cluzel, F. Daghia, P. Ladeveze, F. Zhang, Thermo-oxidation behaviour of organic matrix composite materials at high temperatures, (2016), Advances in Aircraft and Spacecraft Science, Vol. 3, No. 2, DOI: http://dx.doi.org/10.12989/aas.2016.3.2.000.

   [15] S. Terekhina, M. Mille, B. Fayolle, X. Colin, Oxidation induced changes in viscoelastic properties of a thermostable epoxy matrix, (2013), Polymer Science, Ser.A, Vol. 55, No. 10, pp. 614–624.

   [16] T.V. Tarasova, S.Terekhina, M.Salvia, G.V. Malysheva, Effect of temperature on fretting fatigue characteristics of bismaleimide matrix, (2013), Journal of Friction and Wear, Vol. 34, No. 3, pp. 225–231.

   [17] E. Lacoste, K.Szymanska, S.Terekhina, S. Fréour, F. Jacquemin, M. Salvia, A multi-scale analysis of local stresses during the cure of a composite tooling material, (2012), International Journal of Material Forming, DOI: 10.1007/s12289-012-1100-0.

   [18] S. M. Terekhina, G. V. Malysheva, I. M. Bulanov, T. V. Tarasova, Investigation of Tribological Properties of Polymer Composite Materials Based on Bismaleimide Binder, (2011),  Polymer Science, Series D. Glues and Sealing Materials, Vol. 4, No. 2, pp. 136–137. 

   [19] S.Terekhina, M.Salvia, S.Fouvry, Contact fatigue and wear behaviour of bismaleimide polymer subjected to fretting loading under various temperature conditions, (2011), Tribology International, Vol.44, pp. 396-408. https://doi.org/10.1016/j.triboint.2010.11.014

   [20] S. Terekhina, M. Salvia, S. Fouvry, G. Malysheva, Etude expérimentale de l’usure des résines thermodurcissables BMI et RTM6 sous sollicitations de fretting-usure/ Wear behaviour of the thermosetting resins BMI and RTM6 under fretting-wear conditions, ouvrage JIFT 2010, edition: Presses Polytechniques et Universitaires Romandes. 

   [21] S. Terekhina, M. Salvia, S. Fouvry, I. Bulanov, An indirect method based on Fretting test to characterize the elastic properties of materials: Application to a epoxy resin RTM6 under variable temperature conditions, (2010), Wear, Vol. 269, pp. 632-637. 

   [22] L. Hattali, S. Terekhina, R. Francois, N.Mesrati, D. Tréheux, Optimization of fabrication parameters of Alumina/Nickel alloy joints for high-temperature application (2009), IOP conf. series: Materials Science and Engineering, 5(1):012011, DOI: 10.1088/1757-899X/5/1/012011

   [23] S. Terekhina, M. Salvia, S. Fouvry, G. Malysheva and T. Tarasova, Fretting wear damage of HexTOOLTM composite depending on the different fibre orientations, (2009), IOP conf. series: Materials Science and Engineering, 5(1): 012019, doi:10.1088/1757-899X/5/1/012019. 

2. Conférences internationales et nationales 

   [1] T. Caillault, L. Guillaumat and S. Terekhina, Design of bio-inspired glass-sponge lightweight cellular structure and manufacture via 3D printing continuous flax fiber biobased composite for energy absorption application, ESMC 2025, 12th European Solid Mechanics Conference, 7-11 juillet, Lyon, France, 2025.

   [2] T. Caillault, L. Guillaumat and S. Terekhina, Influence de la trajectoire d’impression 3D des structures bio-composites bioinspirées sur le comportement en compression / Influence of 3D printing trajectory of bio-inspired biocomposite structures on the compression behavior, JNC 2025, 30 Juin – 2 Juillet, Gif-sur-Yvette, 2025.  

   [3] T. Caillault, L. Guillaumat and S. Terekhina, Design and Manufacturing of 3D-printed continuous Flax fiber reinforced Lightweight Celluar Composite Structures for investigation of compresssive loaded properties, ECCM21, 2-5 juillet, Nantes, France, 2024. 

   [4] S. Terekhina, S. Egorov, L. Guillaumat, M.L. Hattali, De l’impression 3D des polymères aux bio-composites à fibres continues/ From 3D-printing of polymers to continuous fiber bio-composites, JNC 22, Besançon, 3-5 juillet, 2023.

   [5] S. Terekhina, S. Egorov, T. Tarasova, I. Skornyakov, L. Guillaumat, M.L. Hattali, In-situ Impregnation by FFF process of continuous textile flax/PA6 composites, 2nd International Conference on Additive Manufacturing of Composites, Online Conference, 23-24 November, 2021. 

   [6] S. Terekhina, T. Tarasova, S. Egorov, I. Skornyakov, L. Guillaumat, L. Hattali, Flexural quasi-static and fatigue behaviours of fused filament deposited PA6 and PA12 polymers, ACMT 2020, International Conference, May 31 – 2 June, Moscow, Russia, 2021.

   [7] S. Egorov, T.V. Tarasova, S.Terekhina, Production technology for polymeric composite materials by additive manufacturing methods, International Conference on Modern Trends in Manufacturing Technologies and Equipment,  7-11 September, Sevastopol, Russia, 2020.

   [8] R. Manaii, S.Terekhina, L.Guillaumat, D.Duriatti, Durabilité des bio-composites à matrice thermoplastique/ Durability of thermoplastic bio-composites, JNC 21, Bordeaux INP, 1-3 juillet, 2019.

   [9] R. Manaii, S. Terekhina, D. Duriatti, L. Guillaumat, Durability of bio-composites materials based on thermoplastic matrix, Materiaux 2018, 19-23 Novembre, Strasbourg, France, 2018.

   [10] L. Guillaumat, S.Terekhina, I.Derbali, A.Monti, A.El Mahi, Z. Jendli, Flax Fibers Reinforced Thermoplastic Resin Based Biocomposites, a Future for SustainableComposite Parts, International Conference on Civil, Offshore & Environmental Engineering, Kuala Lumpur, Malaysia, August 13-14, 2018.

   [11] S.Terekhina, D. Duriatti, Durability of bio-composites, JEC 2018, miniconference - stand Composites in Action, 07 March, Paris, France, 2018.

   [12] S. Terekhina, M.L. Hattali, L. Guillaumat, Influence of parameters on mechanical properties of thermoplastic polymers obtained by Fused Filament Fabrication (FFF), ICCM-21, 21st International Conference on Composite Materials, 20- 25 August, Xi'an, China, 2017. 

   [13] S. Terekhina, I. Derbali,  L. Guillaumat, P.Ouagne, Influence of manufacturing process, damage repair and moisture content on low velocity impact properties of comingled woven flax/PP composites, ICCM-21, 21st International Conference on Composite Materials, 20- 25 August, Xi'an, China, 2017.

   [14] S. Terekhina, I. Derbali, L. Guillaumat, P. Ouagne, Etude expérimentale de l’endommagement de bio-composites fabriqués par un procédé rapide innovant : Approche multi-échelle avec prise en compte des conditions humides / Experimental damage study of bio-composites made by new-developed rapid manufacturing process: Multi-scale approach, taking into account the moisture conditions, Journées Nationales sur les Composites (JNC 20), 28-30 juin 2017, Champs-sur-Marne, France, 2017.

   [15] M.L. Hattali, S. Terekhina, 3D printing materials obtained by fused deposition modeling process: influence of fabrication parameters, International Conference of Mechanic and Aeronautics, 17-20 October, Zeralda, Algeria, 2016. 

   [16] S.Terekhina, I. Derbali, L.Guillaumat, P. Ouagne, Mechanical behavior of comingled woven flax/PP composites subjected to low velocity impact: from manufacturing to damage repair taking into account moisture conditions, International Workshop «Dynamic behaviour of green composites», 27-29 September, ISAE-ENSMA, Poitiers, France, 2016.

   [17] I. Derbali, S. Terekhina, L. Guillaumat, P. Ouagne, Rapid manufacturing of composite structures made of fabric flax / polypropylene, ECCM17 - 17th European Conference on Composite Materials, 26-30th June, Munich, Germany, 2016.

   [18] M. Crozatier, S.Terekhina, F. Dau, L. Guillaumat, Mechanical characterization of composite materials from curved structures, ECCM17 - 17th European Conference on Composite Materials, 26-30th June, Munich, Germany, 2016.

   [19] M.L. Hattali, S. Terekhina 3D printing materials obtained by fused deposition modeling process: influence of material properties and fabrication parameters, THERMEC 2016: 9th International Conference on Processing & Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, May, Graz, Autriche, 2016. 

   [20] M. Crozatier, S. Terekhina, L. Guillaumat, Caractérisations Physico-chimique et mécanique d’une Résine vinylester après vieillissement humide, Colloque Journée SF2M Section Ouest, 12 Mai, Caen, France, 2016.

   [21] M. Crozatier, S. Terekhina, L. Guillaumat, F. Dau, Influence du procédé d’enroulement filamentaire sur le comportement mécanique de composites stratifies, Journées Nationales des Composites (JNC -19), 29 Juin -01 Juillet, Lyon, France, 2015.

   [22] I. Derbali, S. Terekhina, L. Guillaumat,  P. Ouagne, Influence des paramètres du procédé d’emboutissage de tissus sur le comportement mécaniques de composites lin/polypropylène, Journées Nationales des Composites (JNC -19), 29 Juin -01 Juillet, Lyon, France, 2015.M. Haddad, M. Crozatier, Svetlana Terekhina, L. Guillaumat, Nouvelles citernes routières en matériaux composites soumises à des sollicitations complexe,Journée SF2M Ouest, Angers, France, 2015.

   [23] J. Cinquin, X. Colin, B. Fayolle, M. Mille, S. Terekhina, M. Gigliotti, J-C. Grandidier, M.C. Lafarie-Frenot, M. Minervino, C. Cluzel, F. Daghia, P. Ladeveze, F. Zhang, Durability and thermo-oxidation behaviour of organic matrix composite materials at high temperatures, 6ème international conference on fatigue of composite, 25-27 March, France, 2015.

   [24] S. Terekhina, M. Mille, B. Fayolle, X. Colin, Modification des propriétés viscoélastiques d’une matrice époxy thermostable pendant son vieillissement thermique/ Changes in the viscoelastic properties of a thermostable epoxy matrix during its thermal ageing, Journées Nationales des Composites (JNC -18), 12-14 Juin, Nantes, France, 2013.

   [25] S. Terekhina, M. Mille, B. Fayolle, X. Colin. Changes in thermomechanical properties during the thermal ageing of a thermostable epoxy matrix, Russian-French symposium on composites materials, 10-13 July, Saint Petersburg, Russia, 2012.

   [26] M.Mille, S.Terekhina, X.Colin, B. Fayolle, Towards a non-empirical kinetic modeling of thickness structural changes during PETI-330 thermal ageing, 15th European Conference on Composite Materials, 24-28 Juin, Venice, Italy, 2012.

   [27] S. Terekhina, M. Salvia, S. Fouvry, T. Tarasova. Influence de la température sur le comportement en fretting-usure du composite CFRP HexTOOLTM, Matériaux 2010, 18-22 Octobre, Nante, France, 2010.

   [28] S.Terekhina, M. Salvia, S. Fouvry. Etude expérimentale de l’usure des résines thermodurcissables BMI et RTM6 sous sollicitations de fretting-usure, 22èmeJournée Internationale Francophone de Tribologie 2010, 27-28 Juin, ALBI, France, 2010. 

   [29] S. Terekhina, M. Salvia, S. Fouvry, G. Malysheva and T. Tarasova. Fretting wear damage of HexTOOLTM composite depending on the different fiber orientations, 5th International Conference on Advanced Materials Research « EEIGM/AMASE», 4-5 Novembre, Nancy, p.77, 2009.

   [30] S. Terekhina, M. Salvia, S. Fouvry. Fretting of composites and polymers, International Conference on Structural Analysis of Advanced Materials ICSAAM-2009, Manufacturing, Assembly and Structural Applications, 7-10 September, Tarbes, p. 168, 2009.

   [31] S. Terekhina, M. Salvia, S. Fouvry, G. Malycheva. Contact Fatigue Behaviour of Bismaleimide Polymer and its Composite under Fretting Conditions, 17th International Conference on Composite Materials ICCM-17, 25-31 July, Edinburgh, UK, 2009.

   [32] S. Terekhina, M. Salvia, S. Fouvry, G. Malycheva and T.Tarasova. Fretting wear damage of HexTOOLTM composite at room conditions, International Conference at Bauman Moscow State Technical University, Russia, 7-9 April, 2009.